Downloads of v 1.12.1:


Last Update:

28 Jul 2020

Package Maintainer(s):

Software Author(s):

  • New Relic


newrelic-infra admin new relic infra infrastructure

New Relic Infrastructure (Install)

1.12.1 | Updated: 28 Jul 2020



Downloads of v 1.12.1:



Software Author(s):

  • New Relic

New Relic Infrastructure (Install) 1.12.1

All Checks are Passing

2 Passing Test

Validation Testing Passed

Verification Testing Passed


To install New Relic Infrastructure (Install), run the following command from the command line or from PowerShell:


To upgrade New Relic Infrastructure (Install), run the following command from the command line or from PowerShell:


To uninstall New Relic Infrastructure (Install), run the following command from the command line or from PowerShell:


NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Enter your internal repository url

(this should look similar to

4. Choose your deployment method:

choco upgrade newrelic-infra -y --source="'STEP 3 URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

choco upgrade newrelic-infra -y --source="'STEP 3 URL'"

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0

Exit $exitCode

- name: Ensure newrelic-infra installed
    name: newrelic-infra
    state: present
    version: 1.12.1
    source: STEP 3 URL

See docs at

Coming early 2020! Central Managment Reporting available now! More information...

chocolatey_package 'newrelic-infra' do
  action    :install
  version  '1.12.1'
  source   'STEP 3 URL'

See docs at

    Name: newrelic-infra,
    Version: 1.12.1,
    Source: STEP 3 URL

Requires Otter Chocolatey Extension. See docs at

cChocoPackageInstaller newrelic-infra
   Name     = 'newrelic-infra'
   Ensure   = 'Present'
   Version  = '1.12.1'
   Source   = 'STEP 3 URL'

Requires cChoco DSC Resource. See docs at

package { 'newrelic-infra':
  provider => 'chocolatey',
  ensure   => '1.12.1',
  source   => 'STEP 3 URL',

Requires Puppet Chocolatey Provider module. See docs at

salt '*' chocolatey.install newrelic-infra version="1.12.1" source="STEP 3 URL"

See docs at

5. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 28 Jul 2020.


New Relic Infrastructure is an agent which provides flexible, dynamic
server monitoring. Infrastructure empowers modern operations teams to make
intelligent decisions about complex systems, from a physical datacenter to
thousands of Amazon Elastic Compute Cloud (Amazon EC2) or Microsoft Azure

Real-time metrics and powerful analytics reduce your mean-time-to-resolution
(MTTR) by connecting changes in host performance to changes in your configuration.
Hosts are automatically added and removed from the interface as they are created
and destroyed, and a powerful Events page lets you see every change.

Please Note: This is an automatically updated package. If you find it is
out of date by more than a day or two, please contact the maintainer(s) and
let them know the package is no longer updating correctly.

Package Specific

Package Parameters

The following package parameters can be set:

  • /GenerateConfig: - Whether or not to generate a config
  • /LicenseKey: - Your license key
  • /DisplayName: - Display Name
  • /Proxy: - Proxy url and port
  • /CustomAttributes: - Any custom attributes that need to be added

To pass parameters, use --params "''" (e.g. choco install packageID [other options] --params="'/ITEM:value /ITEM2:value2 /FLAG_BOOLEAN'").
To have choco remember parameters on upgrade, be sure to set choco feature enable -n=useRememberedArgumentsForUpgrades.

Stop-Service -Name newrelic-infra -Force -ErrorAction SilentlyContinue
$ErrorActionPreference = 'Stop';

$additionalArgs = ''
$packageParameters = Get-PackageParameters

# see if any parameters were passed
if ($packageParameters['GenerateConfig']) { $GenerateConfig = $packageParameters['GenerateConfig'] }
if ($packageParameters['LicenseKey']) { $LicenseKey = $packageParameters['LicenseKey'] }
if ($packageParameters['DisplayName']) { $DisplayName = $packageParameters['DisplayName'] }
if ($packageParameters['Proxy']) { $Proxy = $packageParameters['Proxy'] }
if ($packageParameters['CustomAttributes']) { $CustomAttributes = $packageParameters['CustomAttributes'] }

if(Get-Variable -Name GenerateConfig -ErrorAction SilentlyContinue) {
  $additionalArgs = 'GENERATE_CONFIG=true'

  if(Get-Variable -Name LicenseKey -ErrorAction SilentlyContinue) {
    $additionalArgs += " LICENSE_KEY=$LicenseKey"

  if(Get-Variable -Name DisplayName -ErrorAction SilentlyContinue) {
    $additionalArgs += " DISPLAY_NAME=$DisplayName"

  if(Get-Variable -Name Proxy -ErrorAction SilentlyContinue) {
    $additionalArgs += " PROXY=$Proxy"

  if(Get-Variable -Name CustomAttributes -ErrorAction SilentlyContinue) {
    $additionalArgs += " CUSTOM_ATTRIBUTES=$CustomAttributes"

$packageName     = 'newrelic-infra'
$softwareName    = 'newrelic-infra*'

$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$url64      = ''

$packageArgs = @{
  packageName   = $packageName
  unzipLocation = $toolsDir
  fileType      = 'MSI'
  url64bit      = $url64

  softwareName  = $softwareName

  checksum64     = 'db3348526b4b0abd26b6007a8e316c018ead7396abffa75ffaeef4b151e3b873'
  checksumType64 = 'sha256'

  silentArgs    = "/qn $additionalArgs /norestart /l*v `"$($env:TEMP)\$($packageName).$($env:chocolateyPackageVersion).MsiInstall.log`""
  validExitCodes= @(0, 3010, 1641)

Install-ChocolateyPackage @packageArgs

Log in or click on link to see number of positives.

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version Downloads Last Updated Status
New Relic Infrastructure (Install) 1.12.0 478 Tuesday, July 21, 2020 Approved
New Relic Infrastructure (Install) 1.11.45 1687 Wednesday, June 3, 2020 Approved
New Relic Infrastructure (Install) 1.11.42 22 Monday, June 15, 2020 Approved
New Relic Infrastructure (Install) 1.11.40 449 Friday, May 22, 2020 Approved
New Relic Infrastructure (Install) 1.11.37 386 Saturday, May 9, 2020 Approved
New Relic Infrastructure (Install) 1.11.35 43 Friday, May 8, 2020 Approved
New Relic Infrastructure (Install) 1.11.26 228 Thursday, April 30, 2020 Approved
New Relic Infrastructure (Install) 1.11.24 375 Tuesday, April 21, 2020 Approved
New Relic Infrastructure (Install) 1.11.22 302 Wednesday, April 15, 2020 Approved

This package has no dependencies.

Discussion for the New Relic Infrastructure (Install) Package

Ground Rules:

  • This discussion is only about New Relic Infrastructure (Install) and the New Relic Infrastructure (Install) package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or New Relic Infrastructure (Install), or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus